LeistoMat - The Number One Finishing Solution for Single Pieces

LeistoMat

Need to switch from one profile to another in seconds? Or to adjust to new formats quickly due to your “frame-oriented” method of processing? Not a problem with the LeistoMat! The workpiece width is scanned using sensors and set automatically. The dipping device, standard on all machines in this range, ensures that there is no breaking of any edges.

The LeistoMat for wood sanding

LeistoMat SD - sanding profiled window components with innovative
soft-disc-technology

The soft disc sanding units for top and bottom surface sand across the work piece and therefore cut the fibres extremely short. The velgro covered disc are very soft which leads to a very fine sanding with little pressure and little heat. The sanding action is much more intense compared to brush sanding, but lighter than belt sanding. The result is an even and smooth surface. The soft disc is ideal for smoothening uneveness due to anual grow rings.
Behind the soft disc units there are brush sanding rollers top and bottom in order to create a straight finish. Furthermore the machine is equipped with 4 brush sanding rollers fom the sides in order to sand all profiles and rebates in one pass.

The LeistoMat is equipped with a TouchPanel control as well as optical sensors for recognition of work piece width and work piece profile. The sanding units will adjust to different profiles within seconds.

When using brush sanding discs instead of soft discs the machine can be used for intermediate sanding as well.

The LeistoMat models for intermediate sanding between coats

There are four different LeistoMat models available for intermediate sanding of profiled window components.  The selection depends on the kind og coat (primer, sealer, lacquer), the kind of frontal profile and the required number of work pieces per day. The four models are euipped with a different number of sanding units, some with brush sanding rollers only, others with a combination of brush sanding rollers and brush sanding discs.
All LeistoMat models have the automatic dipping device in order to avoid sanding through the frontal edges. As well they have optical sensors for recognition of the work piece width and for recognition of the profile geometry (except LZ6). All models will adjust to different profiles within seconds.

LeistoMat LZ6: The entry model

6 brush sanding rollers from 6 angles automatic
recognition of work piece width profile selction by push
buttons PLC control

LeistoMat LZ8:

8 brush sanding rollers from 6 angles
automatic recognition of work piece width and profile geometry TouchPanel control,
first choice for primed work pieces

LeistoMat LZ12:

12 brush sanding rollers from 6 angles,
automatic recognition of work piece width and profile geometry
TouchPanel control,
for high output and ideal for sharp frontal edges

LeistoMat LZ6+2D:

6 brush sanding rollers from 6 angles, additionally 2 brush sanding discs for top and bottom,
automatic recognition of work piece width and profile geometry
TouchPanel control,
first choice for sealer sanding